Thermal Break Technology in Aluminium Profiles - Gids

Deze uitgebreide gids behandelt thermal break technology in aluminium profiles.\n\n## Polyamide Thermal Break Strips\n\nThermal break technology uses polyamide PA66 strips reinforced with 25% glass fibre to separate the inner and outer aluminium profile sections. This interrupts the thermal bridge that would otherwise \n\n## U-Value Improvements\n\nStandard aluminium profiles without thermal breaks have frame U-values (Uf) of approximately 5-7 W/m2K. With thermal break technology, Uf values reduce to 1.5-2.5 W/m2K representing a 60-70% improveme\n\n## Condensation Prevention\n\nThe primary benefit of thermal breaks in colder climates is condensation prevention. Without thermal breaks, the inner surface of aluminium frames falls below the dew point temperature, causing moistu\n\n## Energy Cost Savings\n\nThermal break profiles reduce heat loss through the building envelope by 30-50% compared to standard aluminium systems. For a typical residential property with 20 square metres of aluminium-framed gla\n\nAlcodec biedt oplossingen op maat met Alcodec- en Alcodec-technologie voor optimale resultaten.